 |
|
|
|
I'm Online Chat Now
S355JR Steel Press Plate For Hardboard Door Parquet
|
Product Details:
Payment & Shipping Terms:
|
Detailed Product Description
| Product Name: | Hardboard/Door/Parquet Hot Press Platen | Raw Steel: | S355JR |
|---|---|---|---|
| Hot Platen Type: | Slotted And Welded | Heating By: | Thermal Oil And Steam |
| Size: | 1400-2800*2000-6500*100-280mm | Surface Finishing And Roughness: | CNC Grinding And RA 0.8 |
| Surface Hard Chrome Plating And Polishing: | 0.05mm-0.06mm;Polishinig Into RA 0.4 | Deep Hole Dia. And Tolerance: | 25-28mm;one Side Drilling Or Middle Joints Tolerance Within 2mm |
| Deep Hole Drilling: | CNC Gun Drilling | Dimension Finishing And Tolerance: | CNC Machining And Tolerance +/-0.5mm |
| Flatness: | 0.1mm | Parallizm: | 0.1mm |
| Hydraulic Testing: | 10 Mpa Holding Time 20 Munites | Steam Testing: | 140 C-degree Tolerance Within 3 C-degrees |
| Applicable Industry: | Hardboard/Door/Parquet Hot Press | ||
| High Light: | S355JR Steel Press Plate Blutech,0.1mm Steel Press Plate Blutech,hardboard heating platen Blutech |
||
Custom Made Hardboard/Door/Parquet Hot Press Platen
Those hardboard heating platens are designed into longitudinal drillings,the old design has made the platens into three small pieces and joint them with weldings into one big piece later,but doing this there will be risk to be broken later after using and also there will be welding defects on the surface which shall be found not long later after using,so we think the best solution is doing one piece platen with more than 6 meter drilling and slotting depth more than 150mm.Since two year ago we started supplying customer such one piece platen which has been more than success and customers are quite happy with the quality:
Raw steel:S355JR
The platen size is 1810mm * 5800 *60mm:
Deep hole drilling diameter is 30mm;one side drilling is 3000mm and from both ends 6000mm - joint middle tolerance within 2mm;slotting depth 150mm
Surface RA 0.8 and Parallzim/flatness:0.1mm
Hydraulic testing:15 Mpa Holding time 20 munites
Specification:
|
Material
|
Q345B/A36/S355JR |
|
Product Size
|
1400-2800*2000-6500*100-280mm |
|
Inlets and outlets
|
1/2/3/4/12 inlets and 1/2/3/4/12 outlets |
|
Thickness Tolerance
|
+/-0.5mm
|
|
Deep hole diameter
|
20-45mm
|
|
Heating by
|
thermal oil
|
|
Deep hole drilling from both ends
|
tolerance in the middle +/-1mm
|
|
Heating temperature
|
180 c-degrees
|
|
Temperature uniformity
|
+/-2 c-grees |
|
Working pressure
|
15-100 kg/cm2
|
Main Features:
We can design hot platen according to your size, including the holes(2-in and 2-out, 4-in and 4-out,6-in and 6-out...etc)
1. Heat carrier: Thermal oil;Steam;
2. Steel material: S355JR;ST52;S275JR
3. Parallelism of surface tolerance: 0.01mm whole surface
4. Smoothness accuracy less than RA 1.6/RA 0.8
5. Thickness tolerance: + 0.2mm
Contact Details
Kunshan Blutech Machining Co., Ltd.
Contact Person: Bruce Song
Tel: 86-512-50133504
Send your inquiry directly to us