|
Product Details:
Payment & Shipping Terms:
|
Product Name: | Rubber Compression/Vulcanizing Hot Press Platen For Single Daylight/multi Daylight Hot Presses | Raw Steel: | C45 And Surface Heat Treatment With Hardness HB 180 |
---|---|---|---|
Hot Platen Type: | Slotted And Welded;Screw Plug System;Electronic Heating Rod | Heating By: | Thermal Oil And Steam And Electronic Heating Rod |
Size: | 400*4500/9500/12500/16000*75mm | Surface Finishing And Roughness: | Sanding Into RA 0.8 |
Hard Chrome Plating: | Available | Deep Hole Dia. And Tolerance: | 25-28mm;one Side Drilling Or Middle Joints Tolerance Within 2mm;one Side Drilling Maximum 3500mm |
Deep Hole Drilling: | CNC Gun Drilling | Dimension Finishing And Tolerance: | CNC Machining And Tolerance +/-0.5mm |
Flatness: | 0.1mm | Parallizm: | 0.1mm |
Hydraulic Testing: | 10 Mpa Holding Time 20 Munites | Steam Testing: | 140 C-degree Tolerance Within 3 C-degrees |
Applicable Industry: | Rubber Belt/Rubber Compression/Vulcanizing Hot Press | ||
High Light: | Compression hot press platen Blutech,Vulcanizing hot press platen Blutech,rubber belt heating platen Blutech |
Custom Made Rubber Compression/Vulcanizing Hot Press Platen For Single Daylight/Multi Daylight Hot Presses
The rubber belt presses are designed into big length can be reached maximum 16 meters;with cooling zone in front and following many separate heating zones.Those platens are made by C45 with heat treatment,so when you do the welding you need to keep the temperature and make the slow cooling or the welding shall be broken;After the final grinding those surfaces will be sanded into RA 0.8 by our big sanding machining which is 4 meters width and 32 meter lengths;for some cases the single platen weight shall be more than 30 tons and we are proud to annouce that we can handle the platen weight upto 40 tons:
Raw steel C45 with surface heat treatment and hardended RA 0.8 Parallizm/flatness:0.20-0.30mm size:2200*16000*120mm Hydraulic testing:150 kg/cm2 Temperature tolerance within 3 c-degrees
Specification:
Material
|
ST52/S355JR/S275JR/S235JR |
Product Size
|
400*4500/9500/12500/16000*75mm |
Inlets and outlets
|
1 inlets and 1 outlets |
Thickness Tolerance
|
+/-0.5mm
|
Deep hole diameter
|
20/25/28/30/32/35/38/40/45mm
|
Heating by
|
thermal oil
|
Deep hole drilling from both ends
|
tolerance in the middle +/-1mm
|
Heating temperature
|
180 c-degrees
|
Temperature uniformity
|
+/-2 c-grees |
Working pressure
|
15 kg/cm2
|
Send us your enquiry if you have the similar demand:blutechmachining@163.com Contact person:Bruce Song
Big size Platen CNC machining: 5 meter width*10 meter length
Big Size CNC grinding: 4 meter width*8 meter length
Big Size CNC deep hole drilling: one side drilling length 3.5 meters,from both ends joint in the middle 7 meters
Contact Person: Bruce Song
Tel: 86-512-50133504