CNC Grinding RA0.8 Hot Platen For Plywood Press

Custom Made Plywood Hot Press Platen for Plywood Hot Press

Those plywood hot platens are made as per the highest quality standard and following the production drawings of the world leading plywood hot press makers,such as Raute,Biele Group,Cremona.

The quality requirement has been detailed from Raw steel plate grade and source to finished hot platen packing:

Raw steel:Q345B(S355J2+N) SIZE:1450*2800*45MM

Deep hole diameter:25mm And drilling from both ends and middle joints tolerance within 2mm

Welding Slots width 30mm and tolerance +0.5mm and depth tolerance +0.5mm

Weldings are not allowed any defects or bubbles,any leaking is not acceptable 

Two times hydraulic testing have been done in order to make sure we have no leaking problem

CNC machining for width and length are applicable in order for precise assembly 

Surface grinding quality has been specific higher requirement for RA 0.8 Parallizm 0.1mm Flatness:0.10mm,any thickness minus tolerance and defects are not allowed

Surface RA 1.6 Parallizm 0.1mm Flatness:0.10mm

Hydraulic Testing:100kg/cm2 holding time 20 munites temperature tolerance within 3 c-degrees

Production flow:Rough surface milling-deep hole drilling;slotting;weldings;CNC precise milling;rough grinding;CNC grinding-testing-packing-container loading

Send us your enquiry if you have the similar demand:blutechmachining@163.com Contact person:Bruce Song

Hot Platen Size: 1400*2800*45mm for 5 daylights laminating hot press

2000*3600*50mm hot poress platen for 15 daylights overlaying hot press:

2000*3600*50mm hot poress platen for 15 daylights overlaying hot press:

Hot press platens for 25 daylights plywood hot press:

Hot press platens for 20 daylights overlaying hot press: