|
Product Details:
Payment & Shipping Terms:
|
Product Name: | Custom Made Laminated Veneer Lumber (LVL) Hot Press Platen For Single Daylight/multi Daylights/continuous Presses | Raw Steel: | Q345B/A36/S355JR |
---|---|---|---|
Hot Platen Type: | Slotted And Welded | Heating By: | Thermal Oil And Steam |
Size: | 2500*9000*100mm | Surface Finishing And Roughness: | CNC Grinding And RA 1.6 |
Deep Hole Dia. And Tolerance: | 28mm;one Side Drilling Or Middle Joints Tolerance Within 2mm | Deep Hole Drilling: | CNC Gun Drilling |
Dimension Finishing And Tolerance: | CNC Machining And Tolerance +/-0.5mm | Flatness: | 0.1mm |
Parallizm: | 0.1mm | Hydraulic Testing: | 15 Mpa Holding Time 20 Munites |
Steam Testing: | 140 C-degree Tolerance Within 3 C-degrees | Applicable Industry: | Three Layer Board/MDF Continuous/Partical Board/LVL Hot Press |
High Light: | continuous press steel platen Blutech,LVL Steel Platen Blutech,Q345B metal platen Blutech |
laminated veneer lumber (LVL) Heating Platens For Single Daylight / Multi Daylights /Continuous Hot Press
LVL- laminated veneer lumber, is used in construction industry which need extreme high quality. Many wood veneers with same thickness shall be pressed into one board. LVL can be manufactured to any length in a continuous production press. Being a low-cost building material, LVL is an ideal replacement to solid wood and is often used in the form of boards, beams, joists and supports.
Specification:
Material
|
S355JR;ST52;Q345B |
Product Size
|
2500*9000*100mm |
Inlets and outlets
|
6 inlets and 6 outlets |
Thickness Tolerance
|
+/-0.1mm
|
Deep hole diameter
|
28mm
|
Heating by
|
steam;thermal oil
|
Deep hole drilling from both ends
|
tolerance in the middle +/-1mm
|
Heating temperature
|
180 c-degrees
|
Temperature uniformity
|
+/-2 c-grees |
Working pressure
|
100 kg/cm2
|
Those heating platens due to the big thickness and weight are designed into several small circulations and big size deep hole diameter in order to achieve the fast heating and final temperature uniformity;welding quality have been specially paid attention and any bad weldings with bubbles will not acceptable as they will leak after very short using time.We have the toughest quality control here and every production step shall be well monitored and final surface by surface inspection shall be appliied:
Raw steel Q345B/A36/S355JR RA 0.8 Parallizm/flatness:0.10mm size:1450*2800*45mm Hydraulic testing:100 kg/cm2 Temperature tolerance within 3 c-degrees
Platen size:2500*6000*120mm
Send us your enquiry if you have the similar demand:blutechmachining@163.com Contact person:Bruce Song
Those platens are for three layer board hot press with size 2500*9000*100mm:
Inspection:
Slotting the welding bed:
Big CNC gun drilling:
Perfect surface roughness finishing-RA 0.8:
Hydraulic testing for leaking:
Perfect surfacw quality after sanding into RA 0.4
16 meters length heating platens deep hole drilling
Contact Person: Bruce Song
Tel: 86-512-50133504